Wle-Hg-Ndr - Buffalo WLE-DA2 User Manual

Connect the antenna's MC card connector into the wireless device. Then adjust the antenna to
send/receive the best signal. When using the antenna on an adapter you can judge the signal
strength by watching the bars on the client manager as you adjust the antenna. When used on a
router/AP you can test it by placing a device with a wireless adapter at a low signal position and
then move the antenna on the router/AP to see if the signal improves.
Approximate Range
Adjustment of antenna angle is
recommended to improve the signal
strength and boost performance.
Technical Specifications
Polarization Method
Connector Type
Frequency Range
Antenna Gain
Dimensions
Weight
Package Contents
The AirStation 6.5 dBi High Gain Indoor Omni Directional
Antenna, model WLE-HG-NDR supports 2.4 GHz 802.11g
and 802.11b wireless devices to increase signal strength up
to 2 times and boost wireless performance. MC to RP-TNC
connector adapter is included for use with other
manufacturers' wireless devices. The 5 ft.cable offers the
option for desktop placement or wall mounting. Slick
design, easy installation offers a perfect high gain
antenna solution for any wireless network.

WLE-HG-NDR

Vertical or Horizontal; Horizontal during
transmission
MC, external MC to RP-TNC connector included
2,401 - 2,484 MHz (1-11channel)
6.5 dBi (4.7 dBi including cable loss)
35 X 10.5 X 10 cm
0.22 kg ,0.45 lb.
2.4 GHz Indoor Omni Antenna with 5 foot cable,
2 Screws for wall mounting, MC to RP-TNC
connector, Quick Setup Guide, Warranty
Statement
13