Network Settings; Routing Setup (Not In Use); Packet Filter (Not In Use); Management Network Diagnosis Settings - Buffalo WLA-G54C User Manual

Fig ure 4.1.5a
WDS Display
Fig ure 4.3.1
System Infor-
mation
10
Installation / Setup
Connected AirStation (Display/Delete): Once settings have been added to the WDS confi gura-
tion screen, the MAC Address of associated Access Point(s) will be displayed.
Click Apply to confi rm settings.
4.2 NETWORK SETTING
4.2. 1 Routing Setup - Routing is not functional feature on an AirStation Bridge.
4.2.2 Packet Filter - Packet Filter is not functional feature on an AirStation Bridge.
■ NOTE: These screens may be skipped entirely.
4.3 MANAGEMENT
Network Diagnosis Settings
Add AirStation (MAC Address): Al-
lows administrator to register the wireless
MAC address of AirStations for (WDS)
point-to-point or point-to multipoint com-
munication between AirStations. The MAC
address to enter is found in the Management
section, under System Information/Wireless
MAC address section. (Section 4.3.1) The
WDS function must be set to Enable. The
MAC address is 12 characters long.
Enter the Wireless MAC address in the form
of two characters separated by a colon and
click Add. Up to six sets may be registered.
MAC Address Example: 00:00:00:00:00:00

4.3.1 System information

System information of the AirStation is ob-
tained here.
• Model name
- Displays model and
firmware version
• AirStation Name -
host name
• DHCP Server function
or Off
• Wireless - Displays the wireless LAN
settings such as wireless MAC address and
wireless firmware.
• LAN - Displays the AirStation LAN
settings
• WAN - Displays the AirStation WAN
settings
• Default Gateway
gateway settings
• WAN side IP address auto
acquisition - This is the method to acquire
the IP address from the WAN (Internet) side
DHCP server.
Displays AirStation
- Displays On
- Displays default