Table of Contents
Advertisement
MAC Address of WAN - Set the
AirStation MAC address to be used for WAN
com mu ni ca tion.
IP Address of WAN - Allows admin-
istrator to select DHCP server, PPPoE, or
manual setting for the WAN port of the
AirStation.
Auto IP assignment from DHCP
server - acquire the IP address automatically
from the DHCP server.
Use PPPoE client - If selected, the in for -
ma tion listed below must be entered.
Manual setting - Enter the appropriate IP
address and subnet mask.
PPPoE Setting (for enabling PPPoE
Client function) - Allows administrator
to use PPPoE as specifi ed by the ISP. The fol-
lowing parameters should be entered:
User Name - Enter the user name (up
to 64 alphanumeric characters) for PPPoE
au tho ri za tion.
Password - Enter password provided by
ISP (up to 64 alphanumeric characters). Re-
enter password in the Confi rmation box.
Service Name - Enter the PPPoE service
name (up to 64 alphanumeric characters). If
ISP doesn't require service name, leave blank.
Connection Type - Select from:
• Continuous Connection - Connects
im me di ate ly after setting and never dis con -
nects.
• Connect on Demand - Reconnects
when the Disconnect time elapses.
• Manual - Disables Automatic Con-
nec tion. Connects to Internet using the
Connect button on the initial settings
page.
The Connect button will not appear until
PPPoE is set.
Disconnection Time - Specify the num-
ber of minutes (0-1440) before automatic
dis con nect is performed. If "0" is entered,
dis con nect function is disabled. If Con-
tin u ous Connection is selected, the
Figure 4.1.4
Wire-
less LAN
Computer
Limitation
Figure
4.2.1A
WAN Port
Settings
Figure
4.2.1B
WAN Port
Settings
11
11
Advertisement
Table of Contents
