Troubleshooting - Eastwood 31902 Instructions Manual

TROUBLESHOOTING

Tool doesn't
respond to
trigger
depression
Tool
performance
is slow or
sluggish
Tool is exces-
sively noisy/
emits high
pitched sound
Tool vibrates
excessively
during use
To order parts and supplies: 800.343.9353 >> eastwood.com
Insufficient vol-
ume of air (CFM)
to operate tool
Moisture or other
contamination in
air supply
Insufficient vol-
ume of air (CFM)
to operate tool
Moisture or other
contamination in
air supply
Air Motor
is lacking
lubrication
Air Motor
is lacking
lubrication
Out of balance
condition from
damaged socket
or accessory
Verify sufficient air supply to tool.
(7.3 CFM @ 90 PSI minimum requirement).
Check for moisture in air line and tool air inlet.
Verify sufficient air supply to tool.
(7.3 CFM @ 90 PSI minimum requirement).
Check for moisture in air line and tool air inlet.
Stop use immediately and add air tool oil
directly to air inlet.
Stop use immediately and add air tool oil
directly to air inlet.
Stop use immediately, check for damage and
replace socket or accessory.
7