Advertisement
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product:
2
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
READ INSTRUCTIONS
•
Thoroughly read and understand these product instructions before using this equipment.
Failure to follow all warnings can result in tool damage or serious physical injury.
•
Keep these product instructions for future reference.
•
This device is specifically designed to be used for compressed air ONLY. Use with any other fluid (liq-
uid or gas) is a misapplication and not permitted. Use with certain hazardous liquids or gasses could
be harmful to the unit or result in a combustible condition or hazardous external leakage.
HEALTH HAZARD!
•
Air discharged from this Regulator is not intended for and should never be used as supply air for
human consumption.
EXPLOSION HAZARD!
•
Do not exceed 85 psi (5.8 bar) of tool inlet pressure. Permanent equipment damage and/or bursting
could occur and cause personal injury.
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
Advertisement
