Advertisement
Quick Links
Item #31834
CONCOURS PRO
0-80 PSI AIR REGULATOR
INSTRUCTIONS
The Eastwood Concours PRO 0-80 PSI Air Regulator
is equipped with an effi cient diaphragm design and
features a 0 to 80 PSI Gauge for accuracy. Compact and
lightweight, it makes the perfect "on the gun" regulator.
SPECIFICATIONS
1/4" MNPT Inlet
1/4" FNPT Outlet
Maximum 85 PSI (5.8 bar) service pressure
Advertisement
Summary of Contents for Eastwood CONCOURS PRO 31834
- Page 1 CONCOURS PRO 0-80 PSI AIR REGULATOR INSTRUCTIONS The Eastwood Concours PRO 0-80 PSI Air Regulator is equipped with an effi cient diaphragm design and features a 0 to 80 PSI Gauge for accuracy. Compact and lightweight, it makes the perfect “on the gun” regulator.
- Page 2 Air discharged from this Regulator is not intended for and should never be used as supply air for human consumption. EXPLOSION HAZARD! • Do not exceed 85 psi (5.8 bar) of tool inlet pressure. Permanent equipment damage and/or bursting could occur and cause personal injury. Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
- Page 3 • Connect the Regulator with the cast-in directional arrow on the underside consistent with the direction of airflow. NOTE: For best results, one of the Eastwood Air Filter/Regulators and/or 2 Stage Air Filter/Desiccant Dryer Systems should be installed before this 80 PSI Regulator.
- Page 4 5 Piece Type-M Air Coupler Set If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/31834manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.343.9353 Outside US: 610.718.8335...