Buffalo AirStation WZR-RS-G54 Setup Manual page 8

Windows 98SE / ME Dial-Up Networking Client installation continued
Type in the Dynamic DNS Host Name
or WAN IP Address of the VPN Server.
The WAN IP Address was referred to
on page 2. Press the 'Next' button.
Click 'Finish'.
This completes the Windows 98SE / ME VPN Client setup. You are now ready to establish
a remote VPN connection to your WZR-RS-G54.
Connecting to the Remote Network
Be sure that you have a valid internet connection before trying to connect remotely.
Double click on the 'Dial-Up
Networking' Icon you created.
Type in the username and password that
was created in the PPTP Server. Verify
you have the correct IP Address and
press on the 'Connect' button. You will
receive feedback that the connection is
successful.
NOTE: To alter the properties of the VPN Client, where internet requests are routed
through your internet connection and not the VPN connection, refer to the following
procedure.
From the 'Dial-Up Networking' page
Right Click on the VPN Client you just
created.
8