Midland BT Sport Manual page 9

devices can be reconnected without needing to complete the pairing process
again.
The headset can store pairing information for 8 different Bluetooth devices.
Initiating the pairing process
1. Please place the headset close to the Bluetooth device you wish to pair
with.
2. Make sure the headset is turned on and in standby mode (the LED indicator
will flash green once every 3 seconds).
3. Hold the Talk Button for approximately 7 seconds until the LED indicator
begins to flash red and green. The headset is now ready to be paired with
the Bluetooth mobile phone
4. Operate the mobile phone and go through the steps of searching for nearby
Bluetooth devices.
I
Please refer to the operating guide of the Bluetooth mobile phone to
perform Bluetooth pairing procedure.
5. When the Bluetooth mobile phone has detected the headset, the LCD
screen on the mobile phone will display 'Midland BTS'.
6. Follow the instructions on the Bluetooth mobile phone to complete
the headset pairing. When the mobile phone prompts for a pin code or
password enter: 0000.
7. If pairing is not completed within 60 seconds, please repeat the steps
described above. The screen on the Bluetooth mobile phone will display
the pairing status.
8. When pairing is successful, the screen on the Bluetooth mobile phone will
display a pairing successful message and the LED indicator on the headset
will flash green 10 times, then the headset will enter standby mode.
9. Now the headset is successfully paired and ready to make and receive
calls.
Wearing the
The headset is designed for 180° rotation to provide a comfortable fit for
users, who won't feel any discomfort even after a few hours of usage. Please
use the headset according to the following directions:
1. Please confirm your neck size; refer to the packaging for the appropriate
neckband sizes
2. Please refer to the directions given in the figure for how the headset should
be worn.
Jaw bone
tr_BT sport.indd 9
E N GL IS H
BT Sport
Microphone position area.
Position in this area to
transmit voice clearly.
Deeper dark colour for better
voice results.

21-03-2007 15:50:38