Veer Cruiser Manual page 6

EN
06.
Assembly
Approved retailers are listed on our website at
goveer.com.
• Cruiser is second-hand.
• Cruiser is damaged as a result of an accident,
airline or freight damage.
• Veer reserves the right to determine whether or
not the terms and conditions of the warranty have
been met. Please contact Veer should you have
any questions regarding your warranty.
LET'S GET
STARTED!
Refer to the illustrations at the rear of this
instruction manual as you read through these steps.
01. - 02. OPENING CRUISER FRAME
03. INSTALLING SAFETY BUMPER
There is a right and left side bumper. They
are coded "L" and "R" for ease of installation.
Make sure tab at the bottom of the bumper
locks securely in open slot in rear axle mount.
04. REAR WHEELS
Press button in centre of wheel and slide into
frame until a click! is heard.
05. FRONT WHEELS
Attach front wheels as shown until you hear
a click!
06. - 07. TRAY
Must be centrally located on the side wall
frame. Locate the centre pin under the frame of
the right and left walls. Rest tray above those
pins and push sides of tray to clamp it in place.
08. INSTALL REMOVABLE CUP HOLDERS
09. FOOT BRAKE
To set brake, press gently until it clicks!
To release brake, gently kick toe plate.
10. - 12. 5 POINT HARNESS
13. ADJUSTING SHOULDER HEIGHT
14. ADJUSTING THE TELESCOPIC HANDLE
Unlock to adjust height and lock. Rotate dial to
adjust lock tension.
15. PUSH MODE
Lock handle bar upright.
16. PUSH ALONG MODE
Lock handle bar upright.
17. PULL MODE
Unlock and drop handle bar.
18. - 19. FOLDING CRUISER FOR STORAGE &
6