Advertisement
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Rocking Legs...
1a.
1
1b.
1c.
1d.
2a.
2
DO NOT over-tighten bolts.
3a.
3
The rocking chair is now ready for use.
6
Align the pre-drilled holes in the Rocking Leg with
the pre-drilled holes in the underside of the Chair
Base.
Ensure that the side of the Rocking Leg with the
recessed holes is facing up.
Attach Rocking Leg to Chair Base using 4 x
41mm Bolts and Washers.
Tighten until firm.
Repeat for second Rocking Leg.
WARNING
Stand chair upright.
Advertisement
