Specifications - Radial Engineering EXTC-SA REAMP User Manual

®
RADIAL EXTC-SA SPECIFICATIONS
Circuit type:
Power requirement:
Frequency Response:
Voltage Gain:
THD+N (1kHz):
Noise:
Intermodulation Distortion:
Maximum input:
Line Level I/O
Type:
Impedance:
Headroom:
Effects Loop I/O
Type:
Impedance:
Gain (variable):
Maximum Gain:
All voltage gain specs with both effect loops bypassed. Insertion of effects units will vary gain somewhat due to
their particular input and output impedances.
CONNECTOR WIRING
XLR Connector
GROUND
1 2
3
COLD (-)
Radial Engineering Ltd.
Class-A discrete, transformer coupled
Radial 15VDC/400mA power supply included
DRY
20Hz ~ 20kHz +/- 1.5dB
0dB
<0.005% @ 0dBu
-93dB
<0.003% @ 0dBu input
+11dBu
XLR & ¼` TRS INPUT
Rear Panel Input - Balanced XLR
Female & ¼` TRS
15k Ohms
-
SEND 1/4" output
Unbalanced ¼"
1.5k Ohms
From -14dB ~ +3dB
(0dB at center point)
+3dB
TRS ¼" Phone Connector
HOT (+)
GROUND
WET
20Hz ~ 10kHz +/- 3.5dB
(-8dB @ 20kHz) Shaped for musical
instruments
12dB - send & receive at max
6dB - send minimum, receive max
0dB - send & receive set at 12 o'clock
<0.002% @ 0dBu
-84dB
<0.02% @ 0dBu input
+11dBu
XLR & ¼` TRS OUTPUT
Rear Panel Output - Balanced XLR
Male & ¼` TRS
200 Ohms
+25dBu
RECEIVE 1/4" input
Unbalanced ¼"
10K ohms
From -99dB ~ +9dB
(0dB at center point)
+9dB
COLD (-)
HOT (+)
4
True to the Music
TS ¼" Phone Connector
HOT (+)
GROUND
EXTC-SA