Using Secure Lock Ware - Buffalo HD-HS1.0TQ User Manual

If you enter an incorrect password, access to the device will be denied. If you chose to
include a hint with your password, the hint will be displayed.
To access the encrypted storage device, a PC must have the Secure Lock Ware software
installed. See page 4 for instructions on installing the Secure Lock Ware software on the
computer if it's not already installed.
Once you have entered the password, you may use the storage device normally. It will
appear in My Computer with the next available drive letter.
When you use your encrypted device, you'll have to enter
your password. This will happen whenever a computer with
the device attached is booted, and when the device is plugged
into a computer.
If this window doesn't open automatically, you may open it
manually from the Secure Lock Ware software by clicking
on Unlock the Device on this PC.
1

Using Secure Lock Ware