Oster TSSTTVDFL1 Instruction Manual page 16

NOTE: You can cancel the defrosting cycle at any time
by pressing the "Start/Cancel" Button once. The
red Start/Cancel Button light will turn off whenever
a function has been completed or a function is
manually cancelled.
USING THE REHEAT FUNCTION (SEE FIG. 11)
Step 1. Turn the "Function" Knob to the Reheat "
function.
Default Temperature: 165°C.
Default Time: 15 minutes.
You may manually activate the Turbo Convection
Heat by pressing the Turbo button once to turn it on.
The blue light of the Turbo button will turn on.
Step 2. To set the temperature:
Turn the Temperature "
increase or decrease the temperature setting. For
the Reheat function, the temperature can be set
from 65°C to 230°C in 1-degree increments.
Step 3. To set the time:
Turn the Time "
decrease the reheating time. The maximum time
setting for Reheat is 60 minutes (1 hour). Once you
have selected the desired reheating time, press the
Start button to initiate the reheating process.
Step 4. To Start:
Press the "Start/Cancel" Button to start the
reheating process. The red Start/Cancel Button
light will illuminate. The LCD Display will show
the Reheat Function, the countdown time and the
selected temperature. The unit will begin to work
and the timer will start counting down.
When the Reheating cycle is complete, the unit will
emit 3 beeps. The LCD and the Start/Cancel Button
Light will turn off after 30 seconds.
NOTE: You can cancel the reheating cycle at any time by
pressing the "Start/Cancel Button once. The red
Start/Cancel Button light will turn off whenever
a function has been completed or a function is
manually cancelled.
" Knob if you wish to
" Knob if you wish to increase or
English-15
"
Figure 11