System Introduction - Spectravideo SVI 318 Service – Technical Manual

2.

SYSTEM INTRODUCTION

This manual is arr anged in the following sections:
1.
General information about the
computer and its peripherals,
descriptions.
2.
Information on how to remove and replace the major assemblies that make
up the computer.
3.
How to use the diagnostic module,
mes sages and which parts to replace.
4.
Tables and charts showing plug/pin assignments,
location of the major components on the controller board.
5 .
Schematices and parts identification information.
For detailed information on how to repair the disk drives,
any other peripherals refer to the approperiate service publication.
To r emove the cover refer to Figure
1 .
Be sure the on/off switch is in the off position.
2 .
Disconnect the power supply.
3.
Disconnect any peripherals.
4 . Remove the seven retaining screens.
SVI-318/SVI-328
including model humber and feature kit
an explanation of the diagnostic
2 - 1
and use the following procedures.
2 . 1
and Mark 11 personal
test points and the
printers, or