Table of Contents
Advertisement
T1 Hall Probe System
12.2 Device name
You can give your T-1 a unique device name that will help you to identify it in a network. Enter
the name in the Device Name field in the Admin pop-up. When you reboot the device, you will
see the new name.
12.3 Rebooting
Sometimes it may be necessary to reboot the T-1. Turning the 24 V power off and on will of
course completely restart the T-1. You can command a hard reset from the Admin pop-up. This
will drop all connections to clients and re-boot the device. The soft reset will reset the
application program, but the T-1 remains "alive during the process. You could for example
maintain a ssh connection to the operating system throughout.
12.4 Changing network settings
The network dialog allows you to switch between DHCP and static addressing, and to set the
static address. The T-1 will default to the static IP address if there is no router on the network.
T1 User Guide
T1_UG_210314
Page 30 of 42
Advertisement
Table of Contents
