Table of Contents
Advertisement
T1 Hall Probe System
On Linux systems the arp command is part of the net-tools package, which you may need to
install in it is not present in the distribution you are using. The terminal command
return a list of IP addresses that are assigned to the MAC IDs of devices in the network address
table.
Now you have the IP address of the T-1 you can enter it in the url field of a web browser to open
the T-1 web page.
TIP
On some networks the T-1 may fail to make network a connection first time. Generally re-
connecting the Ethernet cable or disconnecting and reconnecting the power to the T-1 will allow
the connection to be established.
TIP
If you have set DHCP addressing and connect the T-1 and the computer to a network with no
router, the T-1 will use its static address setting. A direct connection is a case of this type of
network.
T1 User Guide
T1_UG_210314
will
arp -n
Page 12 of 42
Advertisement
Table of Contents
