PASCO ME-6952 Instruction Sheet

Instruction Sheet
for the PASCO
Model ME-6952
PAScar/GOcar Accessories
Plastic end piece
Velcro pads
Magnetic Bumper
(front view)

Introduction

The ME-6952 PAScar/GOcar Accessories can be
used with PASCO's PAScar (ME-6950) or GOcar
(ME-6951). The magnetic bumper piece attaches
to the Velcro™ pads on one end of the PAScar
and can be used for experiments involving elastic
collisions. The friction accessory screw can be
threaded from the underside of the PAScar or
GOcar. The foot pad on the friction accessory
screw rests on any surface, such as a Dynamics
Track, and allows the student to introduce
additional friction to the experiment.

Equipment Included:

• 1 magnetic bumper with Velcro pads and
magnets (part no. 003-07399)
• 1 friction accessory screw with spring (part no.
003-07398)
Magnet
Magnetic Bumper
(rear view)
R
10101 Foothills Blvd.
•
Phone (916)786-3800
Exploded view
(rear)

Additional Equipment Required:

• 1 (or more) PAScar(s) or GOcar(s)

Specifications:

Magnetic bumper: Plastic-molded, polycarbonate,
transparent color; includes 2 neodymium magnets and
2 Velcro™ pads
Friction accessory screw: 1/4-20 UNC-2A
CAUTION: The neodymium magnets
can be hazardous to electronic or
magnetic devices and will erase computer
disks. Store the magnets away from
computer disks, computer monitors
and television sets.
© 2000 PASCO scientific
• •
P.O. Box 9011 Roseville, CA 95678-9011 USA
•
FAX (916)786-8905 email: techsupp @ PASCO.com
Threaded rod
Spring
Foot
Velcro foot pad
Exploded view
(side)
Friction Accessory Screw
(side view)
better
ways to
teach science
012-07672A
11/00
$1.00