Daikin DBC Kit Instructions

HORIZONTAL PROP POWER
EXHAUST FOR 3-12.5 TON UNITS
DBC, DBG, DBH, DRC, DRG, & DRH MODELS
KIT INSTRUCTIONS
Only personnel that have been trained to install, adjust,
service or repair(hereinafter, "service") the equipment
specified in this manual should service the equipment.
The manufacturer will not be responsible for any injury
or property damage arising from improper service or
service procedures. If you service this unit, you assume
responsibility for any injury or property damage which
may result. In addition, in jurisdictions that require one
or more licenses to service the equipment specified in
this manual, only licensed personnel should servise the
equipment.
Improper installation, adjustment, servicing or repair of
the equipment specified in this manual, or attempting to
install, adjust, service or repair the equipment specified in
this manual without proper training may result in product
damage, property damage, personal injury or death.
PROP 65 WARNING
FOR CALIFORNIA CONSUMERS
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
ATTENTION INSTALLING PERSONNEL
As a professional installer, you have an obligation to know
the product better than the customer. This includes all
safety precautions and related items.
Prior to actual installation, thoroughly familiarize yourself
with this Instruction Manual. Pay special attention to all
safety warnings. Often during installation or repair, it is
possible to place yourself in a position which is more
hazardous than when the unit is in operation.
Remember, it is your responsibility to install the product
safely and to know it well enough to be able to instruct a
customer in its safe use.
Safety is a matter of common sense...a matter of thinking
before acting. Most dealers have a list of specific good
safety practices...follow them.
The precautions listed in this Installation Manual are
intended as supplemental to existing practices. However,
if there is a direct conflict between existing practices and
the content of this manual, the precautions listed here take
precedence.
WARNING
WARNING
0140M00517-A
© 2020
P/N: IOD-7116B
DESCRIPTION
The horizontal prop power exhaust kits are used in
conjunction with the model numbers listed at the top of
this installation instruction. These kits are not applicable to
vertical applications. See Table 1 for package usage.
The power exhaust kit includes (1 or 2) 300mm EBM prop-
type fan(s), mounted in power exhaust housing. Wiring
harnesses are provided to connect the power exhaust to
the economizer for low voltage, and to the unit single point
connection for high voltage.
The power exhaust housing is constructed of pre-painted
steel to match color of rooftop unit. For 7½-12½ Ton
applications, the power exhaust replaces the barometric
relief hood on the field supplied return air duct, and mounts
near the economizer.
PART NUMBER TONS
0270L01170
3 to 6
0270L01171
0270L01137
7½ to 12½
0270L01138
Table 1- Part Number Package Usage and
ELECTRICAL SHOCK HAZARD
Failure to follow this warning could cause personal injury
and/or death.
Before beginning modification, be certain that the main-line
electrical disconnect switch is in the off position. Close the
main gas supply shutoff valve. Tag disconnect switch and gas
valve with suitable warning labels.
IMPORTANT: Follow all applicable local
electrical codes and NEC (National Electrical
Code), when installing these kits.
1
19001 Kermier Rd., Waller, TX 77484
www.daikincomfort.com
Date: June 2020
VOLTAGE Height Width
208/230V
1&3 Phase
20 21.25
460V
3 Phase
208/230V
1&3 Phase
18.38 36.5
460V
3 Phase
Dimensions
WARNING
Depth
17
17