Table of Contents
Advertisement
10.1 To Home
When you first go to the Waypoint mode, the guidance will be from aircraft to the "HOME"
waypoint.
HOME waypoint is the location remembered when you started the first job by selecting
"New
Area" to make a new area or
"Old
Area" to fly and spray a predefined area. The aircraft is
supposed to remain on the ground. So the HOME waypoint is supposed to be where you want to
come back when finishing the job.
You can change the HOME waypoint by using the function key <Home>. When you do this, the
speed of aircraft must be close to 0.0.
To get the guidance to fly to HOME, use the function <FlyHome> in Spray mode; or go to the
Waypoint mode then use the function <ToHome>.
Platinum-Navigate Manual
159
AG-NAV Inc.
Advertisement
Table of Contents
