Brother HL-1000 Series User Manual page 67

Question
The printer cannot print full
pages of a document. A
"MEMORY FULL" error
message occurs.
(For HL-1040/1050 Only)
The printer cannot print full
pages of a document. A
"MEMORY FULL" error
message occurs.
(For HL-10-40/1050 Only)
My headers or footers appear
when I view my document on
screen but do not show up
when I print them.
Recommendation


(For HL-1050)
Change the following settings in the supplied
Windows driver and try again. The best
combination of the following settings may vary
depending on your document.
Graphics Mode
TrueType Mode
Use Printer TrueType Fonts


Reduce the graphic quality or the number of font
sizes within your application software.


Reduce the printer resolution.


Reduce the complexity of your document and try
again.


(For HL-1050)
Expand the printer memory by adding a
commercially available SIMM and set the Page
Protection to ON by using the supplied Windows
driver.


(For HL-1050)
Expand the printer memory by installing a
commercially available memorySIMM.


Reduce the printer resolution.


Reduce the complexity of your document and try
again.


Reduce the graphic quality or the number of font
sizes within your application software.
Most laser printers have a restricted area that cannot
be printed on. Usually the first two lines and last two
lines of text cannot print (leaving 62 printable lines).
Adjust the top and bottom margins in your document
to allow for this.
CHAPTER 6 TROUBLESHOOTING
6-13