Table of Contents
Advertisement
MAINTENANCE MENU
SETTINGS
SWIPE RIGHT AT THE TOP OF THE SCREEN
HOME overpressure activated
OFFICE continuation time activated
Return to default settings.
Note VLK's units post-heating fuction must be switched
on from the service menu
Changes of the SERVICE MENU settings always have to be saved
Modbus
Startup with remote control or separate switch;
"remote control ON" the unit operates only
if pre-data is switched on
OR
Out-of-house mode
"Remote control off" the unit operates on
minimum speed with pre-data switched on
Usable if the differential-pressure switch is present
Maintenance interval reminder settings 0-12 months
12
Touch screen buttons:
Fan speed adjustment 1....5
Out-of-house mode
Extended time(office mode)
Boosting
The button can be used to browse
menu upwards and change settings.
The button can be used to browse
menu downwards and change setting value.
Return previous or main menu.
Inlet air cooling temperature -10...15
Inlet air heating temperature 30...40
CO
and/or RH sensors activation
2
The external control 0-10 V activation
CO
and humidity percentage setting
2
Office-mode continuation time setting
30...120 min. Usable with a separate
pulse-switch if the weekly clock is used
in office-mode.
o
C
o
C
Advertisement
Table of Contents
