Repair Kits - JBL EON15 Introduction And General Information

Repair Kits

Part Number
C8REON15
C2REON15P
31385-03
D8R2418
C2REONSUB
C8REON10-G2
C4REON10P
No repair kit is available for the 2412H Compression Driver. Entire driver should
be replaced (P/N 125-10000-00X).
No Repair Kit is available for the M115-8 woofer. Entire driver should be replaced (124-
67001-00X)
Cone Replacement Procedure
NOTE: To recone the EON woofers, it is not necessary to disassemble
the enclosure. The woofer can be reconed from the front.
Tools and Supplies
The following items will be required to properly recone the speaker:
Screwdriver
Long-Nose Pliers
Masking Tape
MEK
Utility Knife
Teflon or Orange Stick
Gap Gauges –
An audio function generator is also required for testing purposes.
The entire recone process uses 3M 1300L adhesive. A tube is included with the recone kit.
Additional adhesive may be ordered from JBL, either by the tube (P/N 71715), or by the
quart (P/N 63376).
12
Transducer Repair
Description
LF Cone Replacement Kit, EON15
LF Cone Replacement Kit, EON15P, EON15P-1/230
Dust Dome, EON15, EON15P, EON15P-1/230 EON15PAK
HF Diaphragm Replacement Kit, EON15,
EON Power15, EON15P-1/230 (2418H) (315436-001X)
LF Cone Replacement Kit, EON PowerSub
LF Cone Replacement Kit, EON10
LF Cone Replacement Kit, Power10
0.089" (15" models only - JBL P/N 90075-.089)
0.080" (10" models only - JBL P/N 90075-.080)