Advertisement
Quick Links
Advertisement
Related Manuals for CenturionPro Original
Summary of Contents for CenturionPro Original
- Page 1 OWNERS MANUAL THE ORIGINAL & SILVER BULLET...
- Page 2 CenturionPro trimming machines are intended for use on legal aromatic herbs and hops. Please check all municipal, provincial/state and federal laws and regulations before using these machines. CenturionPro Solutions does not promote or condone the use of these products in...
- Page 3 The Original and Silver Bullet are high-speed trimming systems, requiring that specific safety precautions are practiced during operation to reduce the risk of personal injury. Improper use of The Original and Silver Bullet, or any CenturionPro product, may cause serious or fatal injury. Please ensure you read the operations manual and warning notes before using the Original and Silver Bullet.
- Page 4 ORIGINAL, SILVER BULLET & LEAF COLLECTOR SPECIFICATIONS ORIGINAL & SILVER BULLET TRIMMER ORIGINAL & SILVER BULLET LEAF COLLECTOR 7 Amp - 110V NA 15 Amp - 220V NA Input Voltage Input Voltage 3.5 Amp - 220V EU/AUS 15 Amp - 220V EU/AUS Dimensions 30"...
- Page 5 OWNERS MANUAL THE ORIGINAL & SILVER BULLET TABLE OF CONTENTS WARRANTY IMPORTANT SAFETY INFORMATION SPECIFICATIONS TABLE OF CONTENTS COMPONENT OVERVIEW MACHINE ASSEMBLY LEAF COLLECTOR ASSEMBLY TRIPLE BAG KIEF COLLECTION SYSTEM SILVER BULLET - SILENCER, SPEAKER ASSEMBLY HOPPER ASSEMBLY CLEANING & MAINTENANCE - BLADE REMOVAL, TRIMMER CLEANING CLEANING &...
- Page 6 COMPONENT OVERVIEW COVER BRUSH Requires Cleaning See Pg. 8 CAM FOLLOWERS UPPER FRAME TUMBLER O-RING TUMBLER Requires Cleaning See Pg. 8 BLADE ADJUSTER BED BAR BLADE & MAGNET BAR CUTTING REEL Requires Cleaning Requires Cleaning See Pg. 8 See Pg. 8 BEARING COVER SHROUD SKIRT...
- Page 7 OWNERS MANUAL MACHINE ASSEMBLY THE ORIGINAL & SILVER BULLET STEP 1: STEP 2: STEP 3: PLACE TUMBLER INSTALL UPPER INSTALL IN GROOVES FRAME COVER Tighten four sealing Place cover over bolts & washers. Upper Frame. STEP 4: INSTALL SKIRT Note: installed on the machine when shipped.
- Page 8 Kief is becoming wildly popular due to the rise of extractions. Unfortunately, machines that require THE BAGS ARE EASY TO WASH WITH A sprays can contaminate and destroy your Kief, making it virtually useless. Thankfully, CenturionPro offers an optional non-stick Quantanium coating on the tumblers. This means no spray is needed, so PRESSURE WASHER USING COLD WATER.
- Page 9 OWNERS MANUAL SILVER BULLET - SILENCER ASSEMBLY THE ORIGINAL & SILVER BULLET STEP 1: STEP 2: STEP 3: ATTACH ATTACH ATTACH BAG CONNECTOR SILENCER TO SYSTEM TO TO BLOWER CONNECTOR SILENCER Connector fits secure and snug to the Attach silencer to connector Attach the bag system to the silencer blower;...
- Page 10 STEP 3: SECURE HOPPER BAG CONNECT THE TO FRAME HOPPER TO THE MACHINE A) Ensure the FRAME & OPENING match. A) Ensure the FRAME & OPENING match the Original and, or Silver Bullet machine exactly. 1 855 535 0558 cprosolutions.com...
- Page 11 MIGHT NOTICE SLIGHT CONTACT BETWEEN YOUR ROTATING CUTTING REEL AND THE FLAT BED BAR BLADE - THIS IS NORMAL. CLEANING THE ORIGINAL & SILVER BULLET For optimal performance and life, the components must be cleaned after every day of operation.
- Page 12 CLEANING & MAINTENANCE GREASING BEARINGS IMPORTANT NOTE: - Regrease bearings after each wash to ensure longevity of your bearings. STEP 1: REMOVE COVER UPPER FRAME STEP 2: REMOVE UPPER FRAME STEP 3: REMOVE TUMBLER TUMBLER STEP 4: APPLY GREASE TO BOTH BEARINGS BEARING COVER * GREASE HOLE...
- Page 13 OWNERS MANUAL CLEANING & MAINTENANCE THE ORIGINAL & SILVER BULLET LEAF COLLECTOR CLEANING STEP 1: REMOVE COVER & IMPELLER FROM LEAF COLLECTOR • Remove 8 screws from the side panel to uncover the leaf collector • Remove the 13mm bolt & washer located in the middle of the fan blades ONLY USE A 6"...
- Page 14 DUAL-PURPOSE HYBRID TUMBLER DESIGNED FOR BOTH WET + DRY TRIMMING All CenturionPro trimming machines are specially designed to trim both wet and dry material better than any other machine on the market. Our Dual-Purpose Hybrid Tumbler has been extensively tested to outperform both the traditional wet tumbler when trimming wet and the traditional dry tumbler when trimming dry.
- Page 15 OWNERS MANUAL THE ORIGINAL & SILVER BULLET QUANTANIUM COATED NON-STICK TUMBLER WHAT IS QUANTANIUM? Quantanium is a multi-coat non-stick coating that incorporates a unique mix of titanium particles. These particles are blended into the coating that stands up to almost anything and makes the tumbler resistant to scratching. The outstanding release is provided by silicone, not PTFE.
- Page 16 TROUBLESHOOTING MY PRODUCT IS STUCK IN THE MIDDLE OF MY TUMBLER AND WILL NOT COME OUT THE OTHER END. 1) The tumbler should always be 40%-60% full. You should be feeding the tumbler every 30-60 seconds; this will ensure that new product entering the machine will help push out product that is trimmed.
- Page 17 OWNERS MANUAL THE ORIGINAL & SILVER BULLET MY MACHINE MOTOR IS HOT 1) Your machine may be overworking due to a voltage drop in your power supply. This can happen if you’re using an extension cord that is too long or undersized. You can only use an extension cord with a maximum length of 25ft.
- Page 18 There will be a 20% restocking fee and the customer will be responsible for all shipping costs. Returns must be packaged same as it arrived and CenturionPro is not liable for any shipping damage incurred on return. If damage occurs in transit on return, CenturionPro will refuse the return and customer will need to process a claim with their shipping provider.
- Page 19 OWNERS MANUAL THE ORIGINAL & SILVER BULLET NOTES FOR ALL OTHER ISSUES, PLEASE EMAIL techsupport@cprosolutions.com, WE WOULD BE HAPPY TO HELP YOU. For more information or to watch our DIY video tutorials visit cprosolutions.com...
- Page 20 cprosolutions.com 1 855 535 0558 sales@cprosolutions.com FOLLOW US ON:...