The XL Trimmers are high-speed trimming systems, requiring that specific safety precautions are practiced during operation to reduce the risk of personal injury. Improper use of The XL Trimmers, or any CenturionPro product, may cause serious or fatal injury. Please ensure you read the operations manual and warning notes before using the XL Trimmers.
OWNERS MANUAL XL TRIMMERS TABLE OF CONTENTS IMPORTANT SAFETY INFORMATION TABLE OF CONTENTS COMPONENT OVERVIEW CONTROL PANEL OVERVIEW MACHINE ASSEMBLY LEAF BLOWER + COLLECTOR BAG ASSEMBLY COVER ASSEMBLY MEDICAL GRADE CONVEYOR SYSTEMS RAIL JACK SYSTEM HOPPER ASSEMBLY - MEDICAL GRADE CLEANING &...
CONTROL PANEL OVERVIEW HEMP & CANNABIS HARVESTING SOLUTIONS INFEED AND QUALITY CONTROL CONVEYORS "ON" SWITCHES "EMERGENCY OFF" SWITCH INFEED AND QUALITY CONTROL CONVEYORS "OFF" SWITCHES LEAF BLOWERS SUCTION SYSTEM XL TRIMMER SYSTEM "ON" SWITCHES "ON" SWITCH LEAF BLOWERS SUCTION SYSTEM XL TRIMMER SYSTEM "OFF"...
Page 7
OWNERS MANUAL CONTROL PANEL OVERVIEW XL TRIMMERS CONNECT: TRIMMERS x 5 CONNECT: BLOWERS x 5 CONNECT: CONVEYORS x 3 Note: Images may not refl ect exact product - Based on XL 10.0 prototype images. For more information or to watch our DIY video tutorials visit cprosolutions.com...
MACHINE ASSEMBLY HEMP & CANNABIS HARVESTING SOLUTIONS STEP 1: ATTACH INDIVIDUAL TRIMMERS x 5 - Use quick release pin system to connect all 5 trimmer units together QUICK RELEASE PIN LINE UP PLACE PIN IN HOLE TO HOLES OF THE SECURE TRIMMERS CONNECTOR TOGETHER...
OWNERS MANUAL LEAF BLOWER + COLLECTOR BAG ASSEMBLY XL TRIMMERS STEP 3: STEP 4: INSTALL DUCT TUBES TO INSTALL DUCT TUBES TO TRIMMER EXHAUST x 5 LEAF BLOWERS x 5 Note: Use 16" hose clamps to Note: Use 16" hose clamps to secure tubes.
COVER ASSEMBLY HEMP & CANNABIS HARVESTING SOLUTIONS STEP 1: ALIGN TUMBLER TO PULLEY GROOVES AND ENSURE THE TUMBLERS ARE END TO END. XL DUAL-PURPOSE HYBRID TUMBLER STEP 2: CLOSE UPPER FRAME COWL DOOR AND SECURE WITH FRAME LATCHES. INDUSTRIAL LATCH CLOSURES STEP 3: ALIGN TUMBLER TO PULLEY GROOVES AND ENSURE THE...
OWNERS MANUAL MEDICAL GRADE CONVEYOR SYSTEMS XL TRIMMERS INFEED CONVEYOR: QUALITY CONTROL CONVEYOR: FULL CUSTOM SPEED CONTROL SYSTEM FULL CUSTOM SPEED CONTROL SYSTEM RAIL JACK SYSTEM STEP 1: STEP 2: SLIDE XL TRIMMER ONTO LOCK XL TRIMMER INTO PLACE STEEL RAIL SYSTEM ONTO STEEL RAIL SYSTEM - Adjust height of trimmer using jack stands for - Once desired angle has been set, bolt on 2 Stopping Brackets...
OWNERS MANUAL CLEANING & MAINTENANCE XL TRIMMERS BLADE REMOVAL For optimal performance and life, the BLADE and the MAGNET BAR must be removed and cleaned every few hours of operation. STEP 1: STEP 2: STEP 3: STEP 4: UNLOCK BLADE UNPIN BLADE BLADE &...
HEMP & CANNABIS HARVESTING SOLUTIONS LEAF COLLECTOR CLEANING STEP 1: REMOVE COVER & IMPELLER FROM LEAF COLLECTOR • Remove 8 screws from the side panel to uncover the leaf collector • Remove the 13mm bolt & washer located in the middle of the fan blades ONLY USE PULLING TOOL WHEN REMOVING THE BLOWER •...
DUAL-PURPOSE HYBRID TUMBLER DESIGNED FOR BOTH WET + DRY TRIMMING All CenturionPro trimming machines are specially designed to trim both wet and dry material better than any other machine on the market. Our Dual-Purpose Hybrid Tumbler has been extensively tested to outperform both the traditional wet DUAL- tumbler when trimming wet and the traditional dry tumbler when trimming dry.
HEMP & CANNABIS HARVESTING SOLUTIONS TROUBLESHOOTING MY PRODUCT IS STUCK IN THE MIDDLE OF MY TUMBLER AND WILL NOT COME OUT THE OTHER END. The tumbler should always be 40%-60% full. You should be feeding the tumbler every 30-60 seconds; this will ensure that new product entering the machine will help push out product that is trimmed.
Page 17
OWNERS MANUAL XL TRIMMERS MY MACHINE MOTOR IS HOT 1) Your machine may be overworking due to a voltage drop in your power supply. This can happen if you’re using an extension cord that is too long or undersized. You can only use an extension cord with a maximum length of 25ft.
Kief is becoming wildly popular due to the rise of extractions. Unfortunately, machines that require sprays can contaminate and destroy your Kief, making it virtually useless. Thankfully, CenturionPro offers an optional non-stick Quantanium coating on the tumblers. This means no spray is needed so your Kief remains 100% pure and usable.
ADDITIONAL ASSISTANCE You are about to enjoy the experience of CenturionPro Solution’s automated trimming machine. For critical information on assembly, cleaning, care, maintenance and how to operate your machine correctly, please review this manual and check out our video tutorials, which are posted on our website for your ease and convenience.
Page 20
HEMP & CANNABIS HARVESTING SOLUTIONS XL TRIMMERS SPECIFICATIONS XL 5.0 XL 5.0 SE XL 10.0 5 x DUAL-PURPOSE HYBRID 5 x DUAL-PURPOSE HYBRID 10 x DUAL-PURPOSE HYBRID 304 STAINLESS STEEL TUMBLERS 304 STAINLESS STEEL TUMBLERS 304 STAINLESS STEEL TUMBLERS 10 x 11-BLADE (26″) CUTTING REELS 15 x 11-BLADE (26″) CUTTING REELS 20 x 11-BLADE (26″) CUTTING REELS 420,000 CUTS PER MINUTE...
Page 21
CenturionPro trimming machines are intended for use on legal aromatic herbs and hops. Please check all municipal, provincial/state and federal laws and regulations before using these machines. CenturionPro Solutions does not promote or condone the use of these products in any way that may be deemed illegal.