Suntec Wellness Klimatronic Monsun 300 Instruction Manual

Suntec Wellness Klimatronic Monsun 300 Instruction Manual

Ultrasonic/warm mist humidifier

Advertisement

Instruction manual
I O N I ZER
I R REC EI V ER
HRS
WARM MIST
TIMER
0 /
0
EMPTY
RELATIVE HUMIDITY
IONIZER
O N /O FF
H U M I D I TY
SPRA Y
H EA T
TI M ER
I O N I ZER
+
-
Monsun 300
ultrasonic / warm mist humidifier

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Klimatronic Monsun 300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Suntec Wellness Klimatronic Monsun 300

  • Page 1 Instruction manual I O N I ZER I R REC EI V ER WARM MIST TIMER EMPTY RELATIVE HUMIDITY IONIZER O N /O FF H U M I D I TY SPRA Y H EA T TI M ER I O N I ZER Monsun 300 ultrasonic / warm mist humidifier...
  • Page 2 Model Klimatronic Ultrasonic:40W, Monsun 300 Wattage: Heat: 130W (with ionizer) Voltage: 230V Water Tank Capacity: 7 Liters Hertz: 50Hz Airflow: 100-450ml/hr Timer Relative Humidity % 9 hrs maximum Included setting Sensor Function Safety precautions and advice 1. Make sure children are kept out of reach of the humidifier. 2.
  • Page 3 Attention: Use the under-side care handle when carrying the fully filled water tank and place another hand under for assistance. Do not put water into the base directly otherwise it will be damaged or cause danger. Do not move the appliance when the water tank is fully filled with water. Operation method All the features of this humidifier can be controlled from the control button in the control panel or the remote control.
  • Page 4 How to set the Timer This humidifier has a 9 timer setting, from 1 hour up to 9 hours. To use this feature, simply press the “Timer” button WARM MIST TIMER on the control panel or remote control. Press once: 1 hour EMPTY RELATIVE HUMIDITY IONIZER...
  • Page 5 Cleaning Cleaning the appliance at least once a week (2 Steps). Step I: 1. Remove the water tank. 2. The base may be cleaned with mild soap and warm water, brush the shake implement and etc slightly. Step II - Sterilization (base and water tank) Mix 1 teaspoon of bleaching agent with 5 liters of water, leave for 20 minutes, shake the water tank for every few seconds.

Table of Contents