Brother Innov-is 40 Operation Manual page 86

k Lower the presser foot lever, and then start
sewing.
A seam allowance is cut while the
stitching is sewn.
If stitch is sewn, the seam allowance will be
about 5 mm (3/16 inch).
a
a 5 mm (3/16 inch)
Note
● The side cutter can cut as much as one layer
of 13-oz. denim.
● After using the side cutter, clean it by
removing any lint or dust.
● If the side cutter can no longer cut fabric,
use a rag to apply a small amount of oil to
the cutting edge of the cutter.
3
85