Information contained in this manual is subject to change without notice. In any event, LSC Control Systems Pty Ltd cannot be held liable for any direct, indirect, special, incidental, or consequential damages or loss whatsoever (including, without limitation, damages...
Page 3
Power Point User Manual Contents Introduction ....................2 Overview ........................2 Features ........................2 Front Panel ....................2 Setting Up and Connecting ................3 Safety ......................... 3 Unpacking ........................3 Mounting........................3 Connections ....................... 3 3.4.1 Input Power Supply ..................... 3 3.4.2 Outputs and Phasing ................... 3 Specifications and Output Options ............3...
3.2 Unpacking Your PowerPoint is fully tested and inspected before leaving the factory. Upon delivery, inspect the PowerPoint for signs of damage. In the event of any damage, contact your LSC agent. 3.3 Mounting The PowerPoint is designed for mounting in a standard 19 inch rack. It occupies 3RU (Rack Units) of space.
Page 6
Corrosion-resistant, powder-coated steel chassis with rear-screened polycarbonate labels Peace of CE (European) and RCM (Australian) approved, two-year warranty, designed and manufactured in Australia by LSC, an Australian owned mind company with over 40 years’ experience in developing world first products Page 4...
Page 7
Note: Earth connection is via the clips on the side of the socket insert. Note: This is the recommended wiring scheme for Harting/Wieland connectors. An alternative wiring scheme exists for these connectors and Power Point units can be wired to the alternative Page 5...
Pin 19 Earth Pin 19 Earth Compliance Statements The Power Point from LSC Control Systems Pty Ltd meets all required CE (European) and RCM (Australian) standards. European Committee for Electrotechnical Standardization (CENELEC). Australian RCM (Regulatory Compliance Mark). -END- Page 6...