[Close] Button Indicator; Troubleshooting - Philips EasyKey Alpha User Manual

Push-pull smart door lock
Table of Contents

Advertisement

[CLOSE] button indicator

8 Troubleshooting

Types of alarms and alarm modes
Inside unlocking alarm under outside forced lock mode
Low battery alarm, prompting you to replace the batteries in time
22
Colors of the light and the
corresponding meanings:
1. Red light with 2 flashes: Indicates
the door has been locked.
2. Green light with 2 flashes: Indicates
the door has been unlocked.
3. Red light with 1 flash: Indicates
the door has been dead locked.
Triggering: If the lock is under outside forced
lock mode, unlocking from inside will trigger
the alarm.
Alarm mode: Continuous repeated alarms.
Turning off: The alarm can be turned off by a
successful verification of any type.
Triggering: After waking up, the system will run an
automatic examination on the battery voltage. If
the voltage is too low, the lock give an alarm and
a voice prompt of "Low battery. Please replace all
batteries".
Alarm mode: A voice prompt of "Low battery.
Please replace all batteries" during unlocking.
Turning off: The alarm will be automatically turned
off.
Anti-dismantle alarm
Triggering 1: The door is pried open and the
sensor latch bolt pops up.
Alarm mode: Continuous repeated alarms.
Turning off: The alarm can be turned off
automatically or by a successful verification.
Triggering 2: Outside escutcheon is pried open
and there is no fit to the door.
Alarm mode: Continuous repeated alarms.
Turning
the successful key verification, or close after
the normal indoor unlock.
Deadbolt abnormity alarm
Triggering: The deadbolt works abnormally.
The door cannot be locked or unlocked.
Alarm mode: Continuous repeated alarms.
Turning off: The alarm will be
automatically turned off.
off:
Auto-close,
or
close
after
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Easykey 9200

Table of Contents