Meanings & Use Of The Indicators; Low Battery Indicator; Outside Forced Lock Indicator; Mute Mode Indicator - Philips EasyKey Alpha User Manual

Push-pull smart door lock
Table of Contents

Advertisement

7 Meanings and use of the indicators
Lock status indicator
Colors of the light and the corresponding
meanings:
Blue: After the system wakes up, the light will
glow blue, indicating that you can operate the
Lock
lock.
status
indicator
Green: After the door is unlocked, the light will
glow green, indicating that the door has been
opened.
Red: After the door is locked, the light will glow
red, indicating that the door has been closed.

Low battery indicator

Colors of the light and the corresponding
meanings:
Red: After waking up, the system will run an
automatic examination on the battery voltage.
If the voltage is too low, the light will flash in
red and there will be a voice prompt of "Low
battery. Please replace all batteries".
Low battery
indicator

Outside forced lock indicator

Colors of the light and the corresponding
meanings:
White:
1. When the door is locked, the light will light
up alone, indicating that you can enable the
outside forced lock function.
2. If you have enabled the outside forced lock
function, the light will light up after the system
Outside forced
wakes up, indicating this function is in use.
lock indicator
20

Mute mode indicator

Colors of the light and the
corresponding meanings:
1. White: Indicates the mute mode is off.
2. Green:Indicates the mute mode is on.
Mute mode
indicator

Inside deadlock indicator

When the door is inside dead locked,
the digital functions of the outside
escutcheon will be disabled.
If the system is waken up manually, the
keypad will display the combination of "15937
(X)" and there will be a voice prompt saying
that the inside deadlock has been enabled.

System lock indicator

3 flashes
2 flashes
3 minutes
2 minutes
1 flash
If there are 5 consecutive
and incorrect inputs of any
of the 3 types of verification
information
(fingerprint/
PIN code/card), this type of
verification will be locked for
3 minutes.
Attention
Only when touching to wake
up the keypad or inputting the
locked type of verification will
the system give such a prompt.
1 minute
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Easykey 9200

Table of Contents