Operations Control Panel; Preparation Before Washing - Midea MT100W70 Owner's Manual

OPERATIONS
Control panel
5
35
Soak
Wash timer
5
35
10
Soak 15
or
Wash timer
Note!
• The product line chart is for reference only, please refer to real product as standard.
●
Wash timer: be used to select required washing time.
●
Spin timer: be used to select required spinning time.
● Wash-Drain selector: For washing or rinsing, select " Normal"or" Heavy".For
draining ,select "Drain"
● Water inlet: be used to inject water..

Preparation before washing

！
Warning!
• The maximum gradient of the supporting surface for the washing machine should not exceed 2º.
• Do not tear down electrical wires and components in the machine by yourself.
• There are holes on the base for ventilation. These holes should not be blocked by
foreign objects (carpets, etc.).
• Never connect the grounding wire with the live wire, or it may lead to an electric shock.
• Check that there are no objects such as coins, hairpins, mud or sand in the pocket.
• Strings should be knotted in advance to prevent entanglement.
• Clothes can be classified for washing according to the texture, dirty degree and color.
• For small pieces (e.g.,stockings) or fluffy clothes, put them into a nylon net for washing.
Plug in
Normal Normal Normal Normal
10
Heavy Heavy Heavy Heavy Drain Drain Drain Drain
15
Wash-Drain Selector Wash-Drain Selector Wash-Drain Selector Wash-Drain Selector
Drain selector
Normal Normal
Heavy Heavy
Wash-Drain Selector Wash-Drain Selector
Wash selector
Put down the drain
Spin timer
Wash Wash/Rinse
soft
Rinse Drain
or
Drain selector
Open tap
7
Washing Spinning
Wash inlet selector
Water inlet selector
Drain
Washing
Wash inlet selector
Spin timer
Water inlet
selector
load and Close door
Spinning