Maintenance; Cleaning And Care; Cleaning The Cabinet; Cleaning The Inlet Filter - Midea MT100W70 Owner's Manual

MAINTENANCE

Cleaning and care

Warning!
• Before your maintenance starts, please unplug the machine and close the tap.

Cleaning the cabinet

Proper maintenance on the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use the wet cloth to wipe it off immediately.
No sharp items are allowed.
Note!
• Formic acid and its diluted solvents or equivalent are forbidden, such as
alcohol, solvents or chemical products,etc.

Cleaning the inlet filter

Note!
• Inlet filter must be cleaned if there is less water.
Lint filter clean
1. Press the button head, and pull the lint filter out.
2. Turn the filter net inside out, and rinse it in water.
3. After inserting the claw, press the button to insert it into place.
4. A sound of "ba" means proper installation.

Anti-freezing protection

To prevent from freezing:
1. Turn off the water tap, remove the water inlet hose and empty water in the
inlet hose completely.
2. Lay the drain hose and turn the drain selector knob to the "Drain"position to empty
the water in the tub.
If the water is frozen, please take the following steps:
. Put the water inlet hose into warm water of about 50℃.
1
. Keep about 2 liters of warm water below 50℃ in the wash
2
tub for about 10 minutes and then lay the drain hose and
turn the wash drain selector knob to the "Drain"position
to empty the water .
12
Button head
Claw
water