Page 5
Insert dowels (A) into panels (2, 3, 4, 5, 6, 7) as shown in the diagram. Remember to apply a small drop (F) to the dowels as shown in the diagram. Screw cam bolts (B) into top panel(1) using a screwdriver as shown in the diagram.
Page 6
Attach panels (2, 3) to shelf (6) ,then insert and tighten cam locks (C) into shelf (6) as shown in the diagram. Attach panels (4, 5) to shelf (7) , then insert and tighten cam locks (C) into shelf (7) as shown in the diagram. Attach the top panels (1) to the shelf assemblies as shown in the diagram.
Page 7
Cover cam locks with plastic covers (D) as shown in the diagram. Slide divider panels (8) into the slots on shelf (6) as shown in the diagram.
Page 8
Attach back panel (9) to the frame assembly using screws (E) as shown in the diagram.