Sun Solaris 2.X Configuration - Brother NC-6100h Network User's Manual

The procedure for pre-V4.0 systems is as follows.
1
Enter smit and select devices.
2
Select printer/plotter.
3
Select manage remote printer subsystem.
4
Select client services.
5
Select remote printer queues.
6
Select add a remote queue.
7
Enter the following remote queue settings:
Name of queue to add (user selectable).
Activate the queue (Yes).
Destination host (print server name; must match name in /
etc/hosts file or use the print server IP address)
Name of queue on remote printer (print server binary or
text service name, eg. BINARY_P1 or TEXT_P1).
Name of device to add (user selectable; for example lp0).

Sun Solaris 2.x Configuration

Sun Solaris 2.x uses the lpsystem and lpadmin programs for remote
printer configuration:
lpsystem -t bsd prnservername
lpadmin -p queue -s prnservername!prnserverservice
accept queue
enable queue
Where queue is the name of the local print queue.
prnservername is the name of the print server (must match the
entry in the /etc/hosts file or IP address).
prnserverservice is the print server BINARY_P1 or TEXT_P1
service.
1 - 9 UNIX PRINTING
(not required on newer Solaris systems)
(not required on newer Solaris systems)