Using Arp To Configure The Print Server Ip Address - Brother NC-6100h Network User's Manual

Using ARP to Configure the Print Server IP
Address
If you are unable to use the BRAdmin application or the printer's
control panel and your network does not use a DHCP server, you can
also use the ARP command. The ARP command is available on
®
Windows systems that have TCP/IP installed as well as Unix
systems. To use arp enter the following command at the command
prompt:
arp -s ipaddress ethernetaddress
Where ethernetaddress is the Ethernet address (MAC address)
of the print server and ipaddress is the IP address of the print
server. For example:
Windows® Systems
®
Windows systems require the hash "-" character between each digit
of the Ethernet address.
arp -s 192.189.207.2 00-80-77-31-01-07
Unix/Linux Systems
Typically, Unix and Linux systems require the colon ":" character
between each digit of the Ethernet address.
arp -s 192.189.207.2 00:80:77:31:01:07
TCP/IP CONFIGURATION 10 - 6