Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Stark U-AURA
Summary of Contents for Stark U-AURA
- Page 1 Original Operating and maintenance manual Multipurpose bucket...
-
Page 2: General
For us, the long lifecycle and efficiency of your new equipment is a priority. To keep the multipurpose bucket in top working condition, read this manual carefully before using the equipment. STARK products are engineered and manufactured in Finland, and each of them is equipped according to the needs of the customer. -
Page 3: Table Of Contents
Table of contents General ..............................2 Read before use ........................... 2 1. DECLARATION OF CONFORMITY ...................... 4 2. PURPOSE OF USE ..........................5 3. SAFETY PRECAUTIONS ........................5 4. IDENTIFICATION INFORMATION AND SPAREPARTS ................ 6 4.1. Identification plate ..........................6 4.2. -
Page 4: Declaration Of Conformity
1. DECLARATION OF CONFORMITY The original manufacturer’s EC declaration of conformity: Generic product name: Multipurpose bucket Models: SL 2000/3200, SL 2200/3600, SL 2350/4150T, SL 2300/3700, SL 2500/3900, SL 2500/4300, SL 2600/4400, SL 2600/4800, SL 2800/5000, SL 3000/5200 Manufacturer: Lametal Ltd Kaskenviertäjäntie 2 73100 LAPINLAHTI, Finland tel. -
Page 5: Purpose Of Use
2. PURPOSE OF USE Multipurpose buckets are intended for removing snow from streets and yards of different size. It also can be use loading snow or other light material. Using to plow or move heavier material than snow is prohibited and will terminate warranty. 3. -
Page 6: Identification Information And Spareparts
(marked in the identification plate) when you order spare parts. For more information on maintenance and spare parts, please contact the STARK maintenance and spare part services or your retailer. -
Page 7: Main Parts Of The Multipurpose Bucket
5. MAIN PARTS OF THE MULTIPURPOSE BUCKET Picture 1. Main parts of the device 1) Multipurpose bucket frame 2) Wing fastener, right 3) Wing, right 4) Wing fastener, left 5) Wing, left 6) Wing fastening pin 7) Hydraulic cylinder 8) Cylinder fastener pin 9) Hydraulic valve 10) Hose set 11) Blade set... -
Page 8: Using The Multipurpose Bucket
6.1. Attaching the multipurpose bucket to the base machine The multipurpose bucket is attached to the base machine with welded or bolted STARK FIT quick hitches. The machine is connected to a hydraulic system. Hydraulic circuit diagrams can be found in a later section in this manual. Ask your retailer for available STARK FIT quick hitches. -
Page 9: Operating The Multipurpose Bucket
7. OPERATING THE MULTIPURPOSE BUCKET Make sure before driving that: the equipment is properly attached to the base machine all locking cotters and pins are secured hydraulic hoses are properly connected the hoses are intact there are no oil leaks in the equipment all functions are working properly you have learnt to use the multipurpose bucket in a closed area before actual use While driving, stay alert for possible malfunctioning and oil leaks... - Page 10 Picture 4. Removing packed snow Sivu 10 / 19...
-
Page 11: Adjustment Of The Wing's Height
7.2. Adjustment of the wing’s height Blades of different thickness can be used in the bucket (Flat-, hole-, saving- and serrated blades). To ensure that the wing’s and the bucket’s blade are on the same level, the wing’s height can be adjusted by changing the places of the adjustment bushings. - Page 12 Picture 7. A worn blade has been turned over. Picture 8. A worn blade with the final adjustment. Sivu 12 / 19...
-
Page 13: Adjustment Of The Bucket Blades
7.4. Adjustment of the bucket blades The bucket blade can be adjusted by attaching it by the upper holes as it wears down. The blade can also be turned over (picture 9). Picture 9. A bucket’s blade at the initial position 7.5. -
Page 14: Maintenance Of The Multipurpose Bucket
8. MAINTENANCE OF THE MULTIPURPOSE BUCKET 8.1. General safety precautions for the use and maintenance Comply with existing laws and regulations and the instructions given in this manual. Never go under an unsecured device. Always apply the parking brake of the base machine before performing any actions on the device. Only use tools that are in proper working order. -
Page 15: Maintenance At 50-Working Hour Intervals Or On A Weekly Basis
8.5. Maintenance at 50-working hour intervals or on a weekly basis Lubricate, preferably with a NLGI-2 grease or equivalent (see instructions in later section) Check the mechanical condition of the device for bends, cracks or breaches Check fastening bolts for tightness (table 1) 8.6. -
Page 16: Hydraulics
9. HYDRAULICS The multipurpose bucket can be connected to a 3-, 4- and 5-hose hydraulic system. The device is equipped with a complex closed hydraulic system, which has been tested and adjusted by the manufacturer. Any alterations or modifications to the hydraulic system are on the sole responsibility of the client. Multipurpose bucket cannot be connected to system with no pressure limitations! Without limitation the attachment can be damaged. -
Page 17: 3-Hose Hydraulics
9.2. 3-hose hydraulics The 3-hose system requires 1 pc of 2-action hydraulic section from the base machine and a free tank line, for pressure limitation to operate. The free tank line can be replaced with a hydraulic accumulator. The electric directional valve is controlled by either a wired controller or the base machine’s own controller. A wired controller is available as an accessory. -
Page 18: Adjustment Of The Safety Valves
9.3. Adjustment of the safety valves The safety valve is a safety mechanism, which is set in factory. Any alterations or modifications to the hydraulic system are on the sole responsibility of the client. Different types of valves are used with different hydraulic systems (pictures 11 and 12 below). The hydraulic cylinder safety valve is adjusted by removing the protective cap, opening a locknut with a 13mm wrench and adjusting the safety valve with a 5mm hex key. -
Page 19: Warranty Policy
3. Warranty period STARK warranty covers a period of one (1) year. If need be, the client and the manufacturer make separate agreements on warranty concerning repairs and spare parts used in repairs. 4. Repairs during the warranty period Repairs during the warranty period are carried out free of charge within the normal working hours by the manufacturer repair and maintenance services or by a repair service provider accredited by the manufacturer.
Need help?
Do you have a question about the U-AURA and is the answer not in the manual?
Questions and answers