For Network Interface Cable Users (For Hl-6050Dn); For Mac Os; 8.6 To 9.2 Users; Mac Os ® 8.6 To 9.2 Users - Brother HL-6050 Quick Setup Manual
Brother hl-6050: quick start
Hide thumbs
Also See for HL-6050:
- Service manual (308 pages) ,
- User manual (181 pages) ,
- Brochure & specs (6 pages)
Table of Contents
Advertisement
2S
For Network Interface Cable Users (For HL-6050DN)
For Mac OS
Connecting the Printer to your Macintosh
1
Turn off the printer's power switch.
2
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
3
Turn on the printer's power switch.
4
Insert the CD-ROM for Macintosh
CD-ROM drive.
Open the Mac OS
Open your langauge folder.
5
Double-click the PPD Installer icon to install
the PPD file.
Follow the on-screen instructions.
®
8.6 to 9.2 Users
®
into your
®
9 folder.
®
& Installing the PPD File
6
From the Apple menu, open the Chooser.
7
Click the LaserWriter 8
select BRN_xxxxxx_P1_AT.
Click the Create button.
Close the Chooser.
*1 If the Apple LaserWriter 8 Driver is not
already installed on your system, you
can download it from
http://www.apple.com
*2 xxxxxx are the last six digits of the
Ethernet address.
Network User's Guide Chapter 7.
Setup is now complete.
*1
icon, and then
*2
29
Advertisement
Chapters
Table of Contents
