Print A Test Page - Brother HL-6050 Quick Setup Manual

4

Print a Test Page

Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1
Make sure that the printer's power switch is
off.
Connect the AC power cord to the printer.
2
Plug the AC power cord into an AC power
outlet/socket.
Turn the printer's power switch on.
3
After the printer has finished warming up,
the READY message appears.
4
Press the Go button. The printer prints a
test page.
Check that the test page has printed
correctly.
Go to the next page
11