For Wireless Network Users (Mac Os ® X 10.2.4 Or Greater Users) - Brother HL-5280DW Quick Setup Manual

Installing the Printer Driver
For wireless network users (
7
Connect your wireless printer and wireless network together: install the
printer driver in infrastructure mode
First you must configure the wireless network settings of your printer to communicate with your network access
point (router). After the printer is configured to communicate with your access point (router) computers on your
network will have access to the printer. To use the printer from these computers, you will need to install the printer
driver. The following steps will guide you through the configuration and installation process.
To achieve optimum results with normal every day document printing, place the Brother printer as close to the
network access point (router) as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect the data transfer speed of your documents.
Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as photos or multi-page documents with mixed text and large
graphics, you may want to consider choosing wired Ethernet for a faster data transfer, or USB for the fastest
throughput speed.
Important
The following instructions will install your Brother printer in a wireless network environment in
infrastructure mode, using a wireless router or access point that uses DHCP to assign IP addresses. If
you want to setup your printer in any other wireless environment you can find instructions in the
Network User's Guide on the CD-ROM.
Note
• If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation.
• Before installation, if you are using Personal Firewall software, disable it. Once you are sure that you can print,
restart your Personal Firewall software.
®
Mac OS X 10.2.4 or greater users)
Infrastructure Mode
®
Macintosh
37