Advertisement
LOOP Display Rack Assembly Instructions
Step 5:
Mount the LOOP Hinge Kit assembly to the center
shelf of the main stand (items marked STEP 5) using
Hardware Pack 5.
Step 7:
Feed the light fixture cable and the transformer
cable through the hole in the back panel. Connect both to
the lighting manifold.
Step 9:
Carefully attach the graphic panels as shown (items
marked STEP 9) using Velcro.
Step 6:
Install the Orbit IC LED light into the light fixture
support arm by sliding light through the fixture clip.
Step 8:
Install the front graphic support to the main stand
(items marked STEP 8) using Hardware Pack 8.
Step 10:
Install the front
sliding door to the main
stand (item marked STEP 10).
NOTE:
Please refer to the included
planogram for merchandising
or visit our dealer support
page at:
www.current-usa.com/support/
dealer-support
Advertisement
