Page 1
Countdown/Stop (CS) and Countdown/Repeat (CR) STOP/RESET Chronograph Lap storage Workout recall by date Average/best time display MODE On-the-fly lap recall (NEXT) Elapsed time counter START/SPLIT 50-lap memory Indiglo night-light with Night-Mode feature M892 M594-M657-M892 Watch Operation Guide Doc. No./Rev. 20170304...
Page 2
Press SET/RECALL (DONE) at any step to exit and save settings. Change Second Time Zone: a. Press START/SPLIT once briefly to peek at 2 time zone. b. Continue to hold button for 4 seconds to switch to displayed time zone. M594-M657-M892 Watch Operation Guide Doc. No./Rev. 20170304...
MEMORY FULL. If there is insufficient memory to store entire workout, total time, date, and the oldest laps will be stored up to remaining capacity. M594-M657-M892 Watch Operation Guide Doc. No./Rev. 20170304...
Page 4
Press STOP/RESET button to stop TIMER. Press again to reset. NOTE: For repeat Timer operation, repetition number appears at top right of screen in both countdown and interval timers. Maximum number of repeats is 99. M594-M657-M892 Watch Operation Guide Doc. No./Rev. 20170304...
When first countdown is complete, Timer proceeds to the next non-zero interval that is set. INDIGLO night-light flashes and beep sounds between each interval. If you set both Timers in interval Timer to repeat, Timer will countdown both intervals and then repeat the entire sequence. M594-M657-M892 Watch Operation Guide Doc. No./Rev. 20170304...
Page 6
When alarm goes off, INDIGLO night-light and alarm icon flash and alert sounds. Press any button to silence. If no button is pushed, alert will cease after 20 seconds and Backup Alarm will activate after 5 minutes. M594-M657-M892 Watch Operation Guide Doc. No./Rev. 20170304...
Need help?
Do you have a question about the M594 and is the answer not in the manual?
Questions and answers