Advertisement
Quick Links
Congratulations on your purchase!
Thank you for choosing a Sirius product.
SM923 - SM924
RANGEHOOD INSTALLATION INSTRUCTIONS
SM923 520
SM923 700
SM923 850
SM924 520
SM924 780
SM924 850
SM924 850 BK
www.siriusbrand.com
1
EAN #9351116002473
EAN #9351116002480
EAN #9351116002497
EAN #9351116002510
EAN #9351116002527
EAN #9351116002541
EAN #9351116002640
Advertisement
Related Manuals for Sirius Satellite Radio SM923
Summary of Contents for Sirius Satellite Radio SM923
- Page 1 Congratulations on your purchase! Thank you for choosing a Sirius product. SM923 - SM924 RANGEHOOD INSTALLATION INSTRUCTIONS SM923 520 EAN #9351116002473 SM923 700 EAN #9351116002480 SM923 850 EAN #9351116002497 SM924 520 EAN #9351116002510 SM924 780 EAN #9351116002527 SM924 850 EAN #9351116002541...
- Page 2 CAUTION BEFORE YOU INSTALL – please read Sirius warranty covers only Sirius product. If you choose to install a non-Sirius branded accessory such as flexible ducting, Sirius will only warrant the hood and motor. If installation is found to be the cause of failure or issue then charges will apply for service and parts.
- Page 3 SM 923 INSTALLATION AND DUCTING Arisit SM923 Underside shown SM924 Underside shown...
- Page 4 flexible cable and plug, or with another device WARNING ensuring omnipolar disconnections from the grid, with an opening distance between the contacts of at Min. 600mm - Max. 700mm for induction cooktops. least 3mm, then such disconnecting devices must be Min.
- Page 5 (fig. 4): installing the appliance. SM923 52 - 505 x 270mm SM923 70 - 685 x 270mm • Use ducting within the min/max specifications SM923 85 - 835 x 270mm •...
- Page 6 ALTERNATIVE METHOD OF WARNING INSTALLATION The rangehood is quite heavy, so two people 1. Drill 4 additional holes to the inside sides of the will be needed for installation. rangehood body. 1. To install the appliance, adjust the position of the adjustable side-springs using the supplied screws (fig.5), according to the thickness of the board, in which the appliance will be fixed.
-
Page 7: Operation
NOTE electrical mains through the supply cord. To remove the rangehood from the cabinet, Recirculating version (SM923 models only) remove the fixing screws (fig. 6) using a Connect the flange with ducting suitable to convey screwdriver, and remove the grease filters the air to the top of the cabinet. -
Page 8: Wiring Diagram
WIRING DIAGRAM ARISIT PTY LIMITED (Australia) www.arisit.com Sirius Hoods and ducting products are only available from our select group of Sirius Professional Stockists ABN 23 091 515 294 nationwide. For the latest list of Sirius Stockists www.arisitwarranties.com.au 40-50 Mark Anthony Drive near you, please refer to www.siriusbrand.com Dandenong South VIC 3175...