Summary Of Lights; How To Use The Magnetic Pulser - Sota MP6 Manual

The Magnetic Pulser Model MP6 Manual

SUMMARY OF LIGHTS

GREEN: Indicates the unit is ON in Regular Mode and the pulse is building.
YELLOW: Indicates the unit is ON in Fast Mode and the pulse is building.
RED: Indicates the pulse is being released.
ORANGE: Indicates the Sound Option is ON.

HOW TO USE THE MAGNETIC PULSER

1. Insert the power plug from the AC-DC Wall Adaptor into the unit and plug the
adaptor into an electrical outlet.
2. Push the ON/OFF/MODE button. All the lights will
flash in sequence to indicate the unit is ready for use.
The unit starts in Regular Mode.
The GREEN lights indicate the pulse is building
and the unit is in Regular Mode.
To switch to Fast Mode, press the ON/OFF/MODE
button. The lights indicating the pulse is building
will now be YELLOW.
In both modes, the RED light will flash each time
the Pulsed Magnetic Field is released from the
Hand Paddle. A click may or may not be heard
5. When a cycle finishes (approx. 20 - 30 minutes) the unit will beep. To continue with
another cycle, push the ON/OFF/MODE button within 20 seconds of the beep. The
unit turns itself OFF if the ON/OFF/MODE button is not pushed within this time.
© 2015-2021 SOTA Instruments Inc.
as the pulse is released. See page 5 for more
information on the Modes.
3. Sound Option: To hear a beep each time the
magnetic pulse is released, push the SOUND
button. The ORANGE light will indicate the
Sound Option is ON.
4. The head of the Hand Paddle should be
located on or as close to the body as possible. It
does not need to touch the skin as clothing will
not interfere with the magnetic field.
Page 4 of 7| www.sota.com