Download Print this page
Sota Magnetic Pulser MP6 Troubleshooting

Sota Magnetic Pulser MP6 Troubleshooting

Advertisement

Quick Links

GREEN Power Light
Is Not On.
Ensure Wall
Adaptor is fully
plugged into the unit
and the wall outlet.
Try another wall
outlet.
Try a different Wall
Adaptor -
12 Volts DC with a
Center Positive Pin
that supplies
at least 1.5 Amps.
There may be a fault with the
unit. Contact Customer Care at
1.800.224.0242
or
repairs@sota.com
Troubleshooting
No GREEN/YELLOW
Charging Lights.
Is the first GREEN Power
No
light on?
Ensure the
correct Wall Adaptor is being
used - 12 Volts DC with
a Center Positive Pin that
supplies at least
1.5 Amps.
There may be a fault with the
unit. Contact Customer Care at
1.800.224.0242
or
repairs@sota.com
MP6
GREEN/YELLOW Charging
Lights come on, but
no RED Light.
Yes
Try a different Wall
Adaptor -
12 Volts DC with a
Center Positive Pin
that supplies
at least 1.5 Amps.
There may be a fault with the
unit. Contact Customer Care at
1.800.224.0242
or
repairs@sota.com
Page 1 of 2

Advertisement

loading
Need help?

Need help?

Do you have a question about the Magnetic Pulser MP6 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sota Magnetic Pulser MP6

  • Page 1 Contact Customer Care at Try a different Wall 1.5 Amps. 1.800.224.0242 Adaptor - repairs@sota.com 12 Volts DC with a Center Positive Pin There may be a fault with the that supplies unit. Contact Customer Care at at least 1.5 Amps.
  • Page 2 Contact Customer Care at used - 12 Volts DC with magnetic field is released 1.800.224.0242 a Center Positive Pin that causing the coil to repairs@sota.com supplies at least generate heat. 1.5 Amps. If the heat from the Try a different Wall...