Brother HL-1060 Series Quick Setup Manual page 8

English: HL-1060 Quick Setup Guide, Body
2. Load paper into Sheet Feeder 1
1
2
PULL
HERE TO
INSERT PAPER
3
4
6
Install the paper support onto the front
multi-purpose sheet feeder 1.
Open the cover of the multi-purpose sheet
feeder 1.
Pushing and sliding the tabs, move the paper
guides horizontally to the widest position.
Load paper in the multi-purpose sheet
feeder with the printing surface face down.
NOTE
The feeder can hold up to 200 sheets of
plain paper or up to 10 envelopes.
Excessive sheets may cause paper jams.
Make sure that the paper is stacked below
the mark.