General Information - Invacare NordBed Ultra User Manual

Rheumatic Hand Control for Invacare® NordBed™
1 Introduction
This manual belongs to an Invacare accessory and is an
addition to the manuals of the related Invacare product.
To ensure safety when using this accessory, read the user
manual of the related product carefully and follow the safety
instructions.
For further information see the user manual of the related
product.

2 General Information

The rheumatic hand control can be used alone or in
combination with another hand control. An additional hand
control is recommended for more advanced functions, like
locking or unlocking functions and resetting the system.
The system consists of:
• 1x Rheumatic hand control
• 1x Junction box
• 1x Adapter cable
3 Installing the Rheumatic Hand Control
Mounting the junction box
1x 4 mm Allen key, 1x 8 mm Wrench
1.
1. Place the mounting bracket of the junction box over the
square tube of the mattress support platform.
2. Fix the junction box with the bolt and nut.
Wiring
2
IenI
2.
1.
On the control unit turn the lock 90 degrees
counter-clockwise to open the lid and remove it.
2.
Disconnect the cable of the tethered hand control from
the control unit.
3.
Connect the cable from the junction box to the control
unit in the socket labeled with hand control symbol.
4.
Put the lid back on the control unit and close it by
turning the lock 90 degrees clockwise.
5.
Remove the locking cam on the junction box.
6.
With the adapter cable, connect the rheumatic hand
control to the yellow marked socket on the junction box .
1663044-A