Bluetooth Operation; Pair Bluetooth-Enabled Devices; Listen To Music From Bluetooth Device - Motorola amphisoundX MT250-ASB31 User Manual

10. Bluetooth Operation

10.1 Pair Bluetooth-enabled Devices

The first time you connect your bluetooth
device to this player, you need to pair
your device to this player.
Note:
- The operational range between this
player and a Bluetooth device is
approximately 8 meters (without any
object between the Bluetooth device
and the unit).
- Before you connect a Bluetooth
device to this unit, ensure you know
the device's capabilities.
- Compatibility with all Bluetooth
devices is not guaranteed.
- Any obstacle between this unit and
a Bluetooth device can reduce the
operational range.
- If the signal strength is weak, your
Bluetooth receiver may disconnect,
but it will re-enter pairing mode
automatically.
1 During ON mode, press the
repeatedly on the unit or SOURCE
button on the remote control to
select Bluetooth mode. "NO BT" will
show on the display if the unit is not
paired to any Bluetooth device.
2 Activate your Bluetooth device and
select the search mode.
"MOTO 250 ASB" will appear on your
Bluetooth device list.
- If you cannot find the unit, press
and hold the
remote control to be searchable. The
display will show "PAIR" and you will
hear "Pairing" from the unit.
3 Select "MOTO 250 ASB" in the pairing
list. After successful pairing, you will
hear "Paired" from the unit, and the
display panel shows "BT".
4 P l a y m u s i c f r o m t h e c o n n e c t e d
Bluetooth device.
To disconnect the Bluetooth function,
you can :
- Switch to another function on the
unit.
button
or BT button on the
- D i s a b l e t h e f u n c t i o n f r o m y o u r
Bluetooth device.The Bluetooth
device will be disconnected from the
unit after the "Disconnected" voice
prompt.
- Press and hold the
on the remote control.
Tips:
• Enter "0000" for the password if
necessary.
• If no other Bluetooth device pairs
with this player within two minutes,
the player will recover its previous
connection.
• The player will also be disconnected
when your device is moved beyond
the operational range.
• If you want to reconnect your device
to this player, place it within the
operational range.
• If the device is moved beyond the
operational range, when it is brought
back, please check if the device is still
connected to the player.
• If the connection is lost, follow the
instructions above to pair your device
to the player again.
10.2 Listen to Music from Bluetooth
Device
- I f t h e c o n n e c t e d B l u e t o o t h
device supports Advanced Audio
Distribution Profile (A2DP), you can
listen to the music stored on the
device through the player.
- If the device also supports Audio
V i d e o R e m o t e C o n t r o l P r o f i l e
(AVRCP), you can use the player's
remote control to play music stored
on the device.
1. Pair your device with the player.
2. Play music via your device (if it
supports A2DP).
3. U s e s u p p l i e d r e m o t e c o n t r o l t o
control play (if it supports AVRCP).
Start, pause or resume play
Skip to the previous or next
/
track
or BT button
13