Automatic Power Off Function; About The Display Brightness; Select Modes; Adjust The Bass Level - Motorola MT160DSB User Manual

• Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.

Automatic Power Off Function

The unit automatically turns to Standby mode
after about 15 minutes if the TV or the external
unit is disconnected, switched off.
• To switch the unit off completely, remove the
mains plug from the mains socket.
• Please turn the unit off completely to save
energy when not in use.

About the Display Brightness

W h e n n o o p e ra t i o n f o r 1 5 s e c o n d s , t h e
brightness of the screen will automatically
dim the brightness. When operated again, the
brightest level will be automatically restored.

Select Modes

Press the (SOURCE) button repeatedly on the
unit or the SOURCE button on the remote control
to select the AUX (LINE IN), OPTICAL, HDMI ARC,
USB and BT (Bluetooth) mode.
The selected mode will show on the display.

Adjust the Bass Level

1 Press the BASS/TREBLE button on the
remote control to activate bass/treble level
setting.
2 Press the / buttons repeatedly to adjust
the bass/treble level from BASS+6/BASS–6
to TREBLE+6/TREBLE–6.
3 After about 5 seconds, the unit will exit from
BASS/TREBLE setting. The display will show
the current selected mode.
4 You may now press the
adjust volume.

Adjust the Volume

- Press the / buttons on the unit or on the
remote control to adjust the volume.
- If you wish to turn the sound off, press the
MUTE button on the remote control. Press
the MUTE button again or press the
buttons on the unit or on the remote control
to resume normal listening.

Select Equalizer (EQ) Effect

While playing, press the MOVIE/MUSIC/NEWS
buttons on the remote control to select desired
preset equalizers:
MOVIE (recommended for viewing movie)
MUSIC (recommended for listening to music)
NEWS (recommended for listening to news)
AUX (LINE IN) / OPTICAL /
HDMI ARC Operation
1 Ensure that the unit is connected to the TV
or audio device.
2 Press the
the SOURCE button on the remote control to
select the AUX, OPTICAL, HDMI ARC mode.
3 Operate your audio device directly for
playback features.
4 Press the
to your desired level.
Tip:
• While in OPTICAL / HDMI ARC mode, if
there's no sound output from the unit, you
may need to activate PCM or Dolby Digital
Signal output on your source device (eg. TV,
DVD or Blu-ray player).

Bluetooth Operation

Pair Bluetooth-enabled Devices

The first time you connect your bluetooth device
to this player, you need to pair your device to this
player.
Note:
/ buttons to
- The operational range between this player
and a Bluetooth device is approximately 26
feet (8m) (without any object between the
Bluetooth device and the unit).
- Before you connect a Bluetooth device
to this unit, ensure you know the device's
capabilities.
- Compatibility with all Bluetooth devices is
not guaranteed.
/
- Any obstacle between this unit and a
Bluetooth device can reduce the operational
range.
button repeatedly on the unit or
/ button to adjust the volume
11