ViewPlus VP Elite User Manual page 23

o Braille Height – Select 'Low', 'Normal' or 'High' Braille dot height. Normal dot height
sets the Braille dots to the same height as the highest graphics dots. Adjust the Braille
dot height higher or lower to suit the reader.
o Emboss Standard Text – When checked, standard text that is not translated to Braille
will be embossed. This is helpful when used with a large font to print raised letters.
Print – This section is only available if a ViewPlus InkConnect is attached to the Elite or Premier
embosser. When this option is checked, the Elite or Premier will create print output.
o Print Quality – Select 'Draft', 'Normal' or 'Best'. Draft is the fastest option, Normal is
standard and Best produces the nicest-looking print output. Please note, that higher
quality print option consumes more ink and takes longer to print.
o One Pass Print/Two Pass Print – This option is only available when printing Double
Sided (Interpoint). Selecting 'One Pass Print' will place the ink print text for both sides
of the paper in two columns on just the front page, which requires the paper to travel
through the printer only once. Selecting 'Two Pass Print' will place the print for each
side of the paper on the corresponding page, requiring the paper to travel through the
printer twice to result in ink print on the front and the back sides of the paper. Therefore
the user will need to flip the paper over and reload it into the printer after initial printing
has finished.
 Advanced
Select the advanced printing options appropriate for your document.
2 in 1 – This option is only available if a ViewPlus InkConnect is attached to the Elite or Premier.
When this option is checked, the printer will generate embossed output from every odd page of
the electronic document, and print output from every even page of the electronic document. The
resulting output will combine two pages of the electronic document on one page on paper. This is
helpful when you wish to have the embossed page show different data than the print page (for
example, if you wish to simplify a complex image on the embossed page but retain the original
detail on the print page).
More Options – Selecting the 'More Options...' button brings up a new dialog with the following
options.
22