Table of Contents
Advertisement
AccuStream Cutting Systems
2
Safety
2.1 Operation and Maintenance Safety
Failure to wear proper safety gear can result in personal injury or death. Safety shoes, hardhat, hearing
protection and other personal protective equipment are strongly recommended.
High-pressure waterjet can cause eye injury. Wear eye protection when
operating or working near the machine.
Wear ear protection when operating or working near the machine to reduce the
risk of hearing loss.
Airborne contaminants or suspended particles may exist when cutting certain
materials. Wear respiratory protection when these conditions are present.
WARNING
•
Read the instructions in all sections of this manual before performing any maintenance on the
valve. Important information is contained throughout this manual to minimize hazards and wear
on the machine.
•
Use the proper tools required for specific procedures. When special tools are called for, make
sure to use them because they are specifically designed to make the job easier and prevent
damage to the equipment.
•
Remove all tools from the work area before starting the machine.
13084 ON/OFF VALVE & CUTTING HEAD MANUAL
•
Before starting any service or maintenance, to the valve and/or
cutting heads ALL water pressure must be removed from the
system.
•
Isolate the water pressure from the on/off valve by dumping the
pump pressure or closing the manual isolation valve.
2
Advertisement
Table of Contents
