Introduction - AccuStream AccuValve On/Off Valve Manual

AccuStream Cutting Systems
1

Introduction

This manual describes the installation,
use and maintenance of the AccuValve
with the Accustream cutting heads.
The valve is designed for flexible
production in either pure water or
abrasive waterjet cutting applications.
The DiaLine head is available for use
with either .281 or .300 OD nozzles
while the A2 head accepts .300 OD
nozzles. Both cutting heads contain a
quick disconnect nozzle nut which can
be hand tightened for the removal and
adjustment of the nozzle.
AccuStream, Inc. reserves the right to
change any product specification or
information herein without notice.
Diamond Warranty
Accustream products are guaranteed to
function properly. If there are any start-up problems, contact Accustream to resolve the issue.
Accustream diamond orifice assemblies come with a 500 hour limited warranty against manufacturer
defect. Damage caused by contamination is not covered. To avoid in-line contaminants from damaging
the diamond orifice assemblies, Accustream suggests using a thimble filter assembly.
Contact Information and Customer & Technical Service
At AccuStream, your purchase is only the beginning of our commitment to help you succeed. We
believe that what happens after the sale is just as important as what happens before.
Customer Service Representatives are available to take your calls Monday through Friday 7:00 AM to
5:00 PM CST. If you need service after-hours AccuStream is also on-call 24 hours a day, 7 days a week
to ensure your system is up and running around-the-clock.
For more information, please call Customer Service toll-free at 866-566-7099.
13084 ON/OFF VALVE & CUTTING HEAD MANUAL
AccuValve with the DiaLine
cutting head.
1
AccuValve with the
A2 cutting head